OFFICE AUTOMATION & HOME APPLIANCE MACHINERY BELTS

Frictional Drive

H·J

 V-ribbed belt
5. RIBSTAR G
Combines advantages of both V-belt and flat belt.
  • Suitable for large speed ratio drives.
  • Flexibiliy allows smaller pulley diameters.
  • Suitable for drives with larger speed ratios.
  • Heat and abrasion resistant.

H

 V-ribbed belt
6. RIBSTAR G BARE BACK
Minimize soiling of peripheral areas.
  • Suitable for clean drives without rubber powder.
  • Recommended for hig speed, high efficiency drives.
  • Flexibility allows smaller pulley diameters.
  • Suitable for drives with larger speed ratio.

HB·J·JB

 V-ribbed belt
7. RIBSTAR U
Polyurethane belt with advantages of both flat belt and V-belt.
  • Since nylon cord is used as tensile member, this belt is flexible and can be used with small diameter pulley (20 mm min). Less bending fatigue.
  • Offers smoother rotation with minimum vibration.
  • Suitable for high speed drives.
  • Abrasion, oil and ozone resistant.

M

 Light duty V-belt
8. POLYURETHANE V
Transparent Polyurethane belt with tension member of strong, low stretch synthetic cords. Minimize rubber dust generation.
  • Wear resistant. Minimizes rubber dust. Offers clean drives.
  • Oil resistant.
  • Highly abrasion resistant in spite of higher co-efficient of friction.

A: Single(MB·MB-L) B: Double(DMB·DMB-L)

 Light duty V-belt
9. POLYURETHANE MB
Small size, light duty, transparent polyurethane belt. Two type-Single cog and double cog-are available.
  • Higher flexibility allows smaller pulley diameters.
  • Higher abrasion resistance offers clean drives.
  • Oil resistant.

3M·5M·7M

 Wide angle V-belt
10. POLYMAX
60° angle series wide angle belt.
  • Suitable for high speed, smooth operations with minimum vibration.
  • Allows space saving drive design.
  • Lower stretch provides maintenance-free operations.
  • Weather resistant and long service life.

M·A·B

 Conventional V-belt
11. STANDARD V
Most widely used power transmission belt. Economical and easily available for replacement.

M·A·B

 Fractional horsepower V-belt
12. BARE BACK V
Minimum quantity of rubber is attached to belt surface.
  • Rubber abrasion is minimized. Keeps machines and peripheral areas clean.

LA·LB

 Less Thickness V-belt
13. FHP
Light duty V-belt with reduced thickness.
  • Highly flexible. Suitable for back side idler applications.
  • Allows smaller pulley diameters compared to drives with standard V-belts.
  • Allows light weight drive design compared to chain and gear drives.

∅2~∅15

 Prene rope
14. STAR ROPE A / SUPER STAR ROPE B
Open end polyurethane belt.
  • Suitable for complicated drives, such as multi-pulley drives and multi-directional drives.
  • Easily joined by hot melt method. Required belt length can be obtained as needed.
  • Abrasion, oil and weather resistant.
  • Suitable for clean drives.
BACK