INDUSTRIAL BELTS

Positive Drive

S4.5M·S8M·S14M

Timing Belt
1. SUPER TORQUE G
Timing belt with round shape tooth profile which provides high power transmission. Espands timing belt application fields. Replaces conventional chain and gear drives.
  • Wider application ranges with higher power transmission capacity.
  • Longer service life.
  • Lower noise level.
  • Cost saving.

S2M·S3M·S5M

Timing Belt
2. SUPER TORQUE GN
Small tooth pitch belt with advantages of Super Torgue G. Suitable for smoother drive applications.
  • Flexible belt permits smaller pulley diameters.
  • Noiseless and longer service life by smooth engagement between pulley and belt.
  • Higher torque transmission by small size belt.
  • Assures higher positioning accuracy.

MXL·XXL·XL·L·H·XH·XXH

Timing Belt
3. GGTG
Suitable for synchronous drives. Remove disadvantages of chain and gear drives.
  • High Power transmission capacity with higher transmission efficiency.
  • Lower noise generation as compared with chain or gear drives.
  • No maintenance required.
  • Lightweight, thin and flexible characteristics allow space saving drive design.
  • The ambient temperature range for operation of the standard belt is -30 to +90°C. Static conductive.

T5·T10·T80·T81·XL·L

Timing Belt
4. UWTG
Clear colored polyurethane belt suiteable for use in clean environment.
  • Oil and grease resistant.
  • Dust-free, clean drive.
  • Spesific configuration on back face of belt are available as an option.

S2M·S3M·S4.5M·S8M·S14M·MXL·XL· L·H

Timing Belt
5. LONGSIZE, OPEN END BELTING
Suitable for long center-distance, synchronous, back and forth drives.
  • Permits larger degree of freedom in belt drive design.
  • Suitable for slipless, synchronous materials handling applications.
  • Suitable for long center-distance, light duty synchronous drives.

T5·T10·XL·L·H·

Timing Belt
6. FREE-SPAN, OPEN END BELTING
Polyurethane belt suitable for long center-distance, synchronous back and forth drives.
  • Long belts (up to 100m) are available.
  • Felt or urethane attachments can be made on back face of belt.
  • Lubrication-free, clean drives.

S8M·S14M·L·H·XH·XXH

Timing Belt
7. LONGSIZE, ENDLESS BELT
Recommended for long center-distance drives.
  • Suitable for slipless, synchronous materials handling applications.
  • Suitable for long center-distance, light duty synchronous drives.

DT5·DT10

Timing Belt
8. DOUBLE SIDED TU
Polyurethane belt with teeth on both faces. Recommended for positive, multi-pulley drives.
  • Suitable for slipless, positive multy-pulley drive.
  • Since special tooth profiles with different tooth pitches can be molded on back face, a wide variety of multi-pulley drives can be designed.
  • Lighter than chains and gears. Suitable for high speed drives. Space saving.

A: DS3M·DS5M·DS8M·DS14M   B: DXL·DL·DH

Timing Belt
9. DOUBLE SIDED TG
Provided with symmetrical teeth on both sides, this belt is suitable for positive, multi-pulley drives.
  • Recommended for slipless, positive multi-pulley drives.
  • Ligher than chains and gears. Suitable for high speed drives. Space saving.
  • Maintenance free.
BACK