INDUSTRIAL BELTS

Frictional Drive

(K)M·A·B·C·D

Conventional V-belt
10. STANDARD V-belt/RED V-belt
Most widely used power transmission belt. Economical and easily obtained for replacements.
  • "SET FREE" provides assured belt length matching and easy inventory control.
  • High power capacity Red V-belts are heat & oil resistant, plus static conductive.

RA·RB·RC·RD·RE

Conventional V-belt
11. MULTI V
Multiple strands of standard/Red V-belts are inseparably joined, providing transverse rigidity.
  • Suitable for compressors, crushers and other tough machines where belt whip, turn-over is caused by pulsating shock load.
  • Useful for material handling applications by using back faces of the belts.

AX·BX·CX

Conventional rawedge cogged V-belt
12. VX
Rawedge cogged V-belt designed for industrial use.
  • High capacity power transmission with space saving.
  • Cogged profile yields greater belt flexibility and allows smaller pulley diameters.
  • Suitable for heavy duty, high speed drives.
  • High power transmission efficiency saves energy.

RAX·RBX·RCX

Conventional rawedge cogged V-belt
13. MULTI VX
Consists of VX type V-belts joined with tie band.
  • Offers stable, vibration-free drives under pulsating shock loads.
  • Cogged construction assures use of smaller pulley diameters than conventional V-belt drives.
  • Suitable for vertical shaft drives such as mixers, agitators without belt jumping off the pulley.

3V·5V·8V

Narrow V-belt
14. MAXSTAR WEDGE
Offers high power transmission capacity with specially designed narrow top width profile.
  • Permits space saving drive designs and lower energy consumption.
  • High speed drives up to 40 m/sec.
  • Heat resistant and static conductive.
  • Designed as "SET FREE" to allow multi-strand drives.
  • Wedge pulleys with bushings offer easy installation.

R3V·R5V·R8V

Narrow V-belt
15. MULTI-MAXSTAR WEDGE
Consist of MAXSTAR WEDGE V-belts joined with tie band.
  • Does not turn over or run off the pulley even under heavily pulsating load conditions.
  • Offers stable driving even in long center-distance drive application.
  • Applicable to vertical shaft drives with out belt running off the pulley.

3VX·5VX

Narrow V-belt
16. MAXSTAR WEDGE SUPREME
Rawedge cogged MAXSTAR WEDGE V-belt.
  • Combines advantages of both wedge belt and rawedge cogged belt. High power transmission capacity belt.
  • Permits economical and space saving drive design.

R3VX·R5VX

Narrow rawedge cogged V-belt
17. MULTI-MAXSTAR WEDGE SUPREME
Consists of MAXSTAR WEDGE SUPREME V-belts joined with tie band.
  • High power transmission belt that resolves the problems such as belt turning-over and belt running-off the pulley raised by multi-strand belt drives.
  • Offers stable operation even under pulsating high shock load condition.

H·J·K·L M

V-ribbed belt
18. RIBSTAR G
Combines high power transmission capacity of V-belt and flexibility of flat belt.
  • Suitable for high speed, high efficiency drives.
  • Flexibility allows smaller pulley diameters.
  • Heat and wear resistant.
  • Minimizes belt vibration and provides space saving drive design.

HB·J·JB

V-ribbed belt
19. RIBSTAR U
Polyurethane flat belt with V-ribs.
  • Flexible and allows smaller pulley diameters.
  • Minimizes belt vibration and offers smooth pulley rotations. Also suitable for high speed drives.

FL·FM·FH

High tension flat belt
20. FLEXSTAR
Its high power transmission capacity allows space saving drive design and reduces maintenance cost.
  • High speed drive up to 60 m/sec. is possible with lower vibration and noiseless running.
  • Heat and oil resistant. Also static conductive.
  • Smaller belt stretch reduces belt retensioning intervals. Also allows low-cost belt drives.

Flat belt
21. SPECIAL PORT/PORT/HARBOR/STICK BAND
Strong belt consisting of best quality cotton fabric.
  • Resistant of frequent bendings with minimum stretch and shrinkage.
  • Heat, water and oil resistant.

3M·5M·7M·11M

Wide angle V-belt
22. POLYMAX
60°angle series wide angle belt.
  • Suitable for high speed, smooth drives with minimum vibration.
  • Allows space saving drive design.
  • Smaller belt stretch and shrinkage offer maintenance-free operation.
  • Long service life with weather resistance.

5M·7M·11M

Wide angle V-belt
23. MULTI POLYMAX
Bck faces of POLYMAX V-belts are joined with poly-amide fabric and polyurethane.
  • Stable running.
  • High-speed drives with reduces vibration.
  • Smaller stretch offers maintenance-free operation.

M·A·B·C

Standard V-belt
24. Perforated V-belt
Open-ended V-belting with joint holes can be adjusted to required length simply with splicing bracket.
  • Recommended for temporary use when the existing V-belt has to be replaced urgently.
  • Permits easy belt replacement without requring machine disassembly.
  • Belt length for multi-strand drive can be adjusted easily.
  • Can be used for material handling purposes with multi-strand drive.
  • Suitable for trial running of machines.

HB·J·JB

Prene rope
25. STAR ROPE (∅2-∅15)/Prene V (M·A·B)/Prene HEXAGON (AA·BB)/SUPER STAR ROPE (∅2-∅15)
Open-end polyurethane belting.
  • Suitable for complicated drives such as multipulley drives, multi-directional drives, etc.
  • Easily joined by hot melt method. Required belt length can be easily obtained.
  • Abrasion, oil and weather resistant.

Top width 10~120mm

Rawedge cogged variable speed belt
26. RCVS
Specially designed for variable speed applications.
  • Flexible and side pressure resistant.
  • Heat, oil, chemical and abrasion resistant.
  • Longer service life with higher flexibility.

Rawedge cogged variable speed belt
27. SUPER VS
High efficiency, precision, long-life belt designed for variable speed applications.
  • Smaller stretch and high flexibility characteristics allow space saving belt drive design.
  • Permits accurate and smooth speed change.
  • Oil, heat and side wall pressure resistant.

Top width 20~120mm

Double cogged variable speed belt
28. DCVS
Belt designed for large horsepower applications or copact drives.
  • High power transmission capacity with higher side wall pressure resistant.
  • Oil, heat and abrasion resistant.
BACK